|
Elcometer 345 "SSG" 2 Key Coating Thickness Gauge |
|
The Elcometer 345 2 Key Gauge, has been specifically designed for the Steel Structures Industry for measuring the coating thickness of structural steel. It can be used to test the wide variety of coatings and coating systems used to on bridges, ships, buildings, etc.
The Elcometer 345 SSG comes complete with a one year warranty and has two operating modes:
- Standard Mode - The total coating thickness over the steel substrate is displayed
- "Offset" Mode* - The User can enter an "offset" value, for example, equivalent to the surface roughness (profile), which is then automatically subtracted from the reading before it is displayed.
* Zero Offset, USA Patent Number 6243661
|
Specifications
| |
Range
|
Resolution
|
Accuracy*
|
Part Number
|
|
µm
|
mils
|
Metric
|
Imperial
|
Metric
|
Imperial
|
| Elcometer 345 Ferrous Integral |
0 – 1500
|
0 – 60
|
0.1µm up to 20µm
|
0.01mil up to 1.0 mils
|
±1-3% or 2.5µm
|
±1-3% or ±0.1mils
|
A345FB-I1
|
| Elcometer 345 Ferrous Separate |
0 – 1500
|
0 – 60
|
A345FB-S1
|
| Elcometer 345 Non-Ferrous Integral |
0 – 1500
|
0 – 60
|
0.1µm up to 20µm
|
0.01mil up to 1.0 mils
|
±1-3% or 2.5µm
|
±1-3% or ±0.1mils
|
A345NB-I1
|
| Elcometer 345 Non-Ferrous Separate |
0 – 1500
|
0 – 60
|
A345NB-S1
|
| Elcometer 345 Dual FNF Integral** |
0 – 1500
|
0 – 60
|
0.1µm up to 20µm
|
0.01mil up to 1.0 mils
|
±1-3% or 2.5µm
|
±1-3% or ±0.1mils
|
A345FNFBI1
|
| Elcometer 345 Dual FNF Separate** |
0 – 1500
|
0 – 60
|
A345FNFBS1
|
| *1% when calibrated close to the required thickness, 3% across the range ** FNF Patent Number GB 2306009B. USA 5886522 |
Standards
|
Can be used in accordance with:
|
FERROUS
|
NON-FERROUS (NF) |
DUAL FERROUS and NON-FERROUS (FNF) |
|
ASTM B 499
BS 5411-11
BS 3900-C5-6Aa
BS EN ISO 1461
DIN 50981
ISO 2178
ISO 2808-6Aa
prEN ISO 19840
|
ASTM D 1400
ASTM B 244
BS 5411-3
BS 3900-C5-6Ba
BS 5599
DIN 50984
ISO 2360
ISO 2808-6Ba
|
All the F |
|
