Model SWC-2 Duromaster SoftwarePerform Timed Tests - Set Durometer Dwell Time The Rex Gauge Model DD-4 Digital Durometer used in conjunction with the Model SWC-2 Durometer Software allows users to:
|
|
Model EMS4 Remote Readout Data Collection AppThe Rex Gauge Model DD-4 Digital Durometer has the capability of communicating over USB with this data collection system. Features:
Note: Durometer and Operating Stand Not Included Downloads Available: |
|
Model G13-0055 USB Data Output CableThe Rex Gauge Model DD-4 Digital Durometer has the capability of communicating over USB with this cable. Downloads Available: |
|
Model 600-11-KB-USB USB Smart CableThe Rex Gauge Model DD-4 Digital Durometer has the capability of communicating over USB with this cable. |
|
Model BF-1 Big Foot AttachmentOne of the most common problems durometer users experience is false readings due to pressing too firmly on the gauge and imbedding the foot of the gauge into the test specimen. To make Rex durometers a good instrument for testing in hard to reach areas, we designed our gauges with the smallest foot possible which is 1/2" diameter. This small foot makes it easy for an inexperienced user to imbed the foot of the gauge into the soft specimens thus obtaining false readings. One simple way to prevent this operator error is to install a Rex Big Foot attachment onto the lower barrel of the gauge. The Big Foot increases the diameter of the foot from 1/2" to 1 3/8" diameter, which makes it nearly impossible for the user to imbed the foot into any test specimen. The Big Foot is an option which can be ordered installed on any new gauge, or ordered separately. It includes a wrench and instructions. **Note: Increasing foot diameter can effect durometer readings. Features:
|
|
Model DIN-FA 18mm Foot AttachmentRex gauges need this foot extension to meet DIN standards for durometer testing. The DIN foot attachment increases the size of the standard gauge foot, thus meeting the DIN standard and reducing the possibility of operator error. The DIN foot is an accessory which can be ordered installed on a new gauge, or ordered separately. It includes and wrench and instructions. **Note: Increasing foot diameter can effect durometer readings. Features:
|
|
Model CLW-A Constant Load WeightConstant Load Weight for Types A, B and OA common error when using a durometer is to imbed the foot of the gauge into the specimen by pressing down with excessive force. All Rex instruments are made in accordance with ASTM D-2240. This standard states that for types A, B, and O the gauge should be pressed onto the specimen with a load of 1 kg. The Rex Constant Load Weight for gauges with an 822g springload (types A, B, O) slides onto the lower barrel of the gauge, gives it a wider foot, and raises the mass of the gauge to the suggested 1kg. With the load weight on the gauge, all the user has to do is set the gauge on the test specimen - no further pressure is necessary. Thus the Constant load weight eliminates the human error that would otherwise occur due to users pressing on excessive or inconsistent force. Constant Load Weights are precision CNC machined from stainless steel and are polished and calibrated by skilled craftsmen at Rex Gauge Co. in the USA. **Note: Increasing foot diameter can effect durometer readings.** Note: Rex Gauge Durometer Models 1500, H-1000, 1700 and 2100 are not recommended for use with operating stands or constant load weights. Features:
|
|
Model CLW-OO Constant Load WeightConstant Load Weight For Types OO and OOO As stated above, a common error when using a durometer is to imbed the foot of the gauge into the specimen by pressing down with excessive force. All Rex instruments are made in accordance with ASTM D-2240. This standard states that for types OO and OOO the gauge should be pressed onto the specimen with a load of 400g. The Rex Constant Load Weight for the type OO and OOO gauges screws onto the top of the gauge and raises the mass of the gauge to the suggested 400g. With the load weight on the gauge, all the user has to do is set the gauge on the test specimen - no further pressure is necessary. Thus the Constant load weight eliminates the human error that would otherwise occur due to users pressing on excessive or inconsistent force. Constant Load Weights are precision CNC machined from stainless steel and are polished and calibrated by skilled craftsmen at Rex Gauge Co. in the USA. Note: Rex Gauge Durometer Models 1500, H-1000,1700 and 2100 are not recommended for use with operating stands or constant load weights. Features:
|
|
Model ORF-1 - O-Ring Fixturing SetO-Rings have always been tough to check using an ordinary A or M scale durometer, but now Rex Gauge Co. offers the O-Ring Fixturing set (ORF-1) which enables the user to check o-rings with the combination of an A or M scale Rex Durometer* and a Rex operating stand. The set consists of five fixtures and one set plug (for setting operating stand travel). The standard ORF-1 set can be used to test O-Rings with cross sections of 1/16", 3/32", 1/8", 3/16" and 1/4". Custom and metric o-ring fixtures can be special ordered through Rex Gauge Co. Features:
For use with Model OS-3 Operating Stand |
|
Model RDC 1 Durometer CalibratorRex Gauge Co.'s RDC-1 durometer calibrator was designed to help durometer users obtain in-house calibration ability. The calibrator comes complete with weights for calibrating springloads of gauges in the A, B, C, D, DO and O durometer scales. It also includes an adapter which gives the RDC-1 the ability to calibrate durometers from manufacturers other than Rex. The RDC-1 is a great way for durometer users to cut the costs of sending durometers out for calibration at the recommended yearly intervals. From the beginning, the Rex calibrator was designed to be simple to use. Unlike a conventional scale, it doesn't require the fabrication on an exotic fixture to hold the gauge, and the user doesn't have to perform any complicated calculations to determine if a gauge is in calibration. With the RDC-1, simply secure the gauge in the clamp and slide the weight to the appropriate point on the scale, if the gauge reads within +/-1 of the point indicated on the scale, it's in calibration. The RDC-1 offers quality unparalleled by any other. With its thick steel base, oversize stainless steel column, and thirty pound weight, the RDC-1 is the sturdiest calibrator made. All components are precision CNC machined to exacting tolerances, and then plated or painted to insure long life. The RDC-1 comes to you fully calibrated with documentation traceable to NIST. It also comes with instructions and technical notes covering specifics about durometer calibration. The Rex RDC-1 calibrator is made and assembled in the U.S.A Features:
|