Clegg Impact Soil TesterThe Clegg Impact Soil Tester Model H-4193A is used for these applications: Pre-constructed soils, trench reinstatement, bell holes and foundations. It uses a 50mm rod and 10 kg weight. Clegg Impact Soil Testers can test a full range of soils and soft rocks as encountered in the construction of flexible pavement and earthworks, as well as athletic fields and surfaces. It is useful for quickly checking variations during construction and monitoring changes over time due to seasonal environmental changes or road traffic, as well as testing natural and "as constructed" conditions. The Clegg can test a full range of natural and synthetic athletic surfaces where hardness/impact characteristics need to be controlled for safety or playability. The Clegg offers the convenience of rapidly scanning compaction variations over large areas. The Clegg may be transported and operated by one person, allowing for low cost, rapid field and laboratory testing and direct readout of the test results. In addition, site location can be conveyed via the GPS option; and moisture measurements can be recorded using the optional H-4191A Moisture Probe with 20cm rods. Meets ASTM standards D5874, F1702.0. All units include the H-4198A Control Unit. To order the GPS-capable model, use the .GPS suffix. Clegg Impact Soil Tester– H-4193A |
 |
Clegg Impact Soil TesterThe Clegg Impact Soil Tester Model H-4190A is used for these applications: Flexible pavement, aggregate road beds, trench reinstatement, bell holes, foundations and uses a 130mm rod and 20 kg weight. Clegg Impact Soil Tester– H-4194A |
|
Clegg Impact Soil TesterThe Clegg Impact Soil Tester Model H-4196A is used for these applications: Natural or synthetic soft turf, sand and golf greens turf (football, baseball, soccer fields, playgrounds and uses a 50mm rod and 2.25 kg weight. Clegg Impact Soil Testers can test a full range of soils and soft rocks as encountered in the construction of flexible pavement and earthworks, as well as athletic fields and surfaces. It is useful for quickly checking variations during construction and monitoring changes over time due to seasonal environmental changes or road traffic, as well as testing natural and "as constructed" conditions. The Clegg can test a full range of natural and synthetic athletic surfaces where hardness/impact characteristics need to be controlled for safety or playability. The Clegg offers the convenience of rapidly scanning compaction variations over large areas. The Clegg may be transported and operated by one person, allowing for low cost, rapid field and laboratory testing and direct readout of the test results. In addition, site location can be conveyed via the GPS option; and moisture measurements can be recorded using the optional H-4191A Moisture Probe with 20cm rods. Meets ASTM standards D5874, F1702.0. All units include the H-4198A Control Unit. To order the GPS-capable model, use the .GPS suffix. Clegg Impact Soil Tester– H-4196A |
 |
Clegg Impact Soil TesterThe Clegg Impact Soil Tester Model H-4190A is used for these applications: Natural or synthetic soft turf, sand and golf greens turf (football, baseball, soccer fields, playgrounds and uses a 50mm rod and 4.5 kg weight. Clegg Impact Soil Tester– H-4190A |
