Load Cell, 500lbf (2.5kN)— HM-2300.005Load Cell, 500lbf (2.5kN)—Load cell is bi-directional for both tension and compression loads. Constructed from stainless steel. The Load cell can be used with various instrumentation to measure loads. Includes: 6 ft. cable with 5-pin DIN plug and calibration certificate. Peformance Specifications: Excitation Voltage: 10 VDC, Maximum 15 VDC Rated output: 3.0 mv/V Minimum Non-linearity: 0.03% Full Scale Output Hysteresis: 0.02% FSO Non-repeatability: 0.01% FSO Creep (30 minutes): 0.03% FSO Zero Balance: ±1.0% FSO Bridge resistance Input: 350 ohms, nominal Output: 350 ohms, ±3.5 ohms Overload Safe Static: 150% of Rated Capacity Ultimate: 175% of Rated Capacity Temperature Compensated range: 0-150°F Effect on output: 0.0006% FSO/°F Effect on zero: 0.0008% FSO/°F Finish: Nickel-plated or Stainless Steel Seal: Waterproof |
|
Load Cell, 1000lbf (5kN)— HM-2300.010Same as above except: Load Cell, 1000lbf (5kN) |
|
Load Cell, 2000lbf (10kN)— HM-2300.020Same as above except: Load Cell, 2000lbf (10kN) |
|
Load Cell, 5000lbf (25kN)— HM-2300.050Same as above except: Load Cell, 5000lbf (25kN) |
|
Load Cell, 10000lbf (50kN)— HM-2300.100Same as above except: Load Cell, 10000lbf (50kN) |
|
Single Channel Readout— HM-2350 |