|
|
Temperature |
 |
Infrared
Non-Contact Thermometers - Temperature Probes - Thermistors
|
 |
380/381/383 Non-Contact Thermometer
Measure
hard-to-reach, sensitive, or large moving target temperatures
Use this instrument to measure surface
temperature and watch the LCD immediately display accurate
data without the use of a probe.
- Easy to use single button operation
- 0.1 resolution for best reading
(280/381)
- Last reading hold
- Soft carrying pouch
- 8:1 distance to spot ratio
- Large, easy to read display
- ºC and ºF selectable
- 9V battery included
- Temperature Range:
- 0ºF to 500ºF
- (-18ºC to 260ºC)
- 383: -31ºF to 999ºF
- 383: (-35ºC to 560ºC)
|
| COMPARE AND SAVE |
| ITEM |
RAYTEK MT2/MT4 |
TPI 380/381 |
| Distance to Spot Size |
8:1 |
8:1 |
| Laser Sighting |
MT2: without laser
MT4: with laser |
380: without laser
381: with laser |
| Display |
3 digits |
4 digits |
| Display Resolution |
MT2: 0.5
MT4: 0.2/1.0 |
380/381: 0.1
383: -35ºC to 299.9ºC : 0.1ºC (0.1ºF)
300ºC to 560ºC : 1ºC (1ºF) |
| Back Light |
Yes |
Yes |
| ºC/ºF Select |
Yes |
Yes |
| Warranty |
1 year |
3 year |
| |
|
|
| |
|
The above information
is provided to the best of TPI's knowledge and is not guaranteed.
The above information is subject to change at any time. |
| SPECIFICATIONS |
|
FAQ |
| Temperature Range |
(380/381): -18ºC ~ 260ºC (0ºF ~ 500ºF)
(383): -35ºC ~ 560ºC (-31ºF ~ 99ºF) |
|
| Accuracy |
±2% of reading, or ±2ºC or 3ºF, whichever is greater |
|
| Repeatability |
±2% of reading, or ±2ºC, whichever is greater |
|
What does "distance to spot ratio" mean? |
| Response Time |
500 m Second |
|
The laser spot needs to be showing inside
the target area. An 8:1 "distance to spot ratio" means you
are measuring a 1" diameter area at a distance of 8". |
| Spectral Response |
7µm ~ 14µm |
|
| Emmisivity : Fixed |
0.95 |
|
| Distance to Spot Size |
8:1 |
|
| Laser Sighting |
380: no laser
381: with laser |
|
How far can I measure? |
| ºC/ºF Select |
Yes |
|
Distance is unlimited. The size of the target
area sets the limit on distance for accurate measurements.
Example: If the area you wish to measure is 1 foot in diameter,
then you will need to be within 8 feet to record an accurate
temperature. |
| Display |
4 digits |
|
| Display Resolution |
0.1 |
|
| Display Hold |
Last reading display for 7 sec. |
|
| Low Battery Detection |
Yes |
|
| Back Light |
Yes |
|
| Operating Temperature |
0ºC ~ 50ºC |
|
What is the smallest target I can read? |
| Storage Temperature |
-25ºC ~ 70ºC without battery |
|
| Relative Humidity |
10% ~ 95% |
|
Approximately one-half inch in diameter. |
| Weight |
7oz (200g) |
|
| Dimension |
155mm x 127mm x 35mm |
|
What is emmisivity? |
| Power |
9V Alkaline or NiCd battery |
|
This is a ratio of an object's infrared emission compared
to a theoretical black body considered to be 1. Emissivity
is always less than 1. Adjustable emissivity allows your
non-contact thermometer to be adjusted to the surface you
are checking to make readings more accurate. |
|
|
|
|
|
|
|
|
|
|
|
 |
Measure hard-to-reach, sensitive, or moving
target temperatures
All objects emit an invisible infrared energy. This instrument
senses the surface temp and displays it immediately on the
LCD. No probe required. The optional laser sighting takes
you to the exact hot or cold spots in a flash.
Features
On or Off
Laser Pointer
8:1 Distance to Spot Ratio
0.1 Resolution
for Best Reading
Large, Easy-Reading
LCD
Data Hold
Function
ºC and ºF
Selectable Temp
Soft Carrying
Pouch (except 370)
9 volt battery
included
|
|
 |
Temperature Measurement versatility with non-contact
and K-Thermocouple input*
*Temperature probes sold seperately
Features
Laser Pointer
8:1 Distance to Spot Ratio
Record Function
Display Data
Hold Function
ºC and ºF
Selectable Temp
Gun-Type
Compact Design
Back Light
Operation
Lock Function
Trigger Switch
Carrying
Holster
9V battery
and soft pouch are included
Temperature Probes
Choose from
a complete line of probes for your unique job assignment
Contact or surface
Gas, Air,
Flame
High Temp
Immersion
Semi Frozen
Product
|
|
Applications
|
Automotive
AC systems
Brakes
Catalytic
converters
Diesel maintenance
Electrical
systems
Engines
Radiators
Electrical
Cables
Circuit Breakers
Connections
Machinery
Motors
Transformers
|
HVAC/R
Compressor Heads
Vents
Hot and cold
areas in insulation
Leaks around
cooler or freezer doors
Leaks around
windows
Steam traps
Registers
Food
Grill and
surface temperatures
Holding cabinets
Serving temperatures
Storage temperatures
|
|
M&L Testing Equipment
(1995) Inc.Canada, carries a large inventory of materials testing equipment.
If you have
any questions regarding a listed product, or if you do not see the equipment
you require, please contact us by using our Contact
Form or E-mail us @
.
A representative will contact you regarding your request shortly.
M&L Testing Equipment
(1995) Inc. ©1996-2007 - 31 Dundas St. (Hwy # 5) Dundas, Ontario,
Canada L9H 7H8
Tel: (905)
689-7327 Fax: (905) 689-3978 Toll Free: 1-800-263-9244
click for map & directions
Calgary Office: 4530-14th St. N.E., Calgary, Alberta Canada
T2E 6T7
Tel: (403) 250-6765 Fax: (403) 250-6803Toll Free: 1-800-663-4779
e-mail:
Site
Updated December 12, 2008
web design
by: Virtual
Image,
Dundas
|
|