• Oscillatap
• U.S.A Standard
• Humboldt Sieve Shakers

• Ro-Tap Motorized Sieve Shakers
• Gilson Sieve Shakers
• Gilson Universal Sample Splitter

Oscillatap Sieve Shaker

• Has unique oscillating and tapping action.
• Will accomodate metric and imperial sieves from 3" to 12".
• Will handle 7 plus pan and cover full height 12" diameter sieves.
• 1/3 horse power, sealed motor.
• Includes 30 minute timer
• White powder coat finish
• Greaseable camshaft & bearings
• Built to last!!
• 1 year parts and labour warranty
• CSA  Approved
  Made in Canada

U.S.A. Standard Sieve Series

Sieve frames are seamless spun brass or stainless steel with rigid rolled edges, extended bottoms (skirts) to fit all frames, pans or separator bottoms of the same diameter. This allows a set of sieves to be stacked. Brass sieves are cost efficient; stainless steel sieves are longer lasting, with sag-resistant mesh.

Click here to view the ASTM Test Sieve Standard Specifications.

Humboldt Sieve Shakers H-4325, H-4310 and H-4330

Complete line of heavy-duty sieve shakers to meet virtually every application—and every budget.

Click here to download the manual

Ro-Tap Motorized Sieve Shaker

W.S. Tyler Test Sieve Shakers were designed for functional use, providing reliable, accurate and consistent particle analysis service. The units require little maintenance and all operate on 110 or 220 voltage. Each unit is serialized, allowing for complete traceability. The Ro-Tap®, first produced in 1917, remains the "industry standard" in many industries.

Click here for more information on the RX-29 and RX-30

Gilson Sieve Shakers

Select a model for more info:

TS-1
TS-2
PS-3
PS-4

Gilson Universal Sample Splitter

Gilson's patented combination of adjustable chutes and gate release hoppers assures top accuracy for mixing and reducing gross samples to representative smaller test quantities. Universal Splitters are convenient, space-saving, and cost-effective. A single model serves the purpose of two or more conventional splitters. Larger SP-1 and SP-0 models offer large capacities not available from other sources. Since the hoppers have a gate release, only the included sample collecting pans are necessary for proper use; but extras are available. Models SP-3, SP-2.5, and SP-0 have 60° chute slopes; other models have simple, inexpensive Adapter Kits to convert standard 45° chutes to 60° when necessary for flowability or to meet specifications (recommended for coal and coke). Models SP-2.5 and SP-3 are mostly of stainless steel; other models are heavy-gauge painted steel which has been forced air dried. More Information