CK11M
• K-type surface probe
• Ribbon sensor to contact uneven surfaces
• 4 inch stem, 4 inch handle for easy control and safe clearances
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

CK12M
• K-type surface probe
• Ribbon sensor to contact uneven surfaces.
• Right angle stem to measure surfaces where straight probes will not reach
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

CK13M
• Heavy duty K-type surface probe
• Spring sensor to maintain pressure on surface being measured
• Ceramic insert to help hold heat near sensor for accurate measurements
• 4 inch stem and 4 inch handle for easy control and safe clearances
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

CK14M
• Heavy duty K-type surface probe
• Spring sensor to maintain pressure on surface being measured
• Ceramic insert to help hold heat near sensor for accurate measurements
• Right angle head on stem to measure surfaces where straight probes will not reach
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

CK15M
• Heavy duty K-type surface probe for HK11M handle
• Spring sensor to maintain pressure on surface being measured
• Ceramic insert to help hold heat near sensor for accurate measurements
• 8 inch stem for easy control and safe clearances
• Exposed junction for fast response

CK16M
• Heavy duty K-type surface probe
• Spring sensor to maintain pressure on surface being measured
• Ceramic insert to help hold heat near sensor for accurate measurements
• 8 inch stem and 4 inch handle for measurements where longer reaches are required
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

CK17M
• K-type surface probe
• Ribbon sensor to contact uneven surfaces
• 45 degree angle stem to measure hard to reach surfaces
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

PIPE CLAMP PROBE CK21M
• K-type thermocouple pipe clamp
• For pipe diameters up to 1.2 inches (30mm)
• For temperatures up to 212°F (100°C)
• Lead length 40 inches (100cm)

FK11M
• K-type general purpose probe
• 4 inch sealed stem for immersion into liquids, gels and semi-solids
• 3 foot coiled lead for durability and long reach
• Stem sealed to protect sensing junction

FK12M
• Heavy duty K-type penetration probe
• 11 inch sealed stem for immersion into liquids, gels and semi-solids
• 6.4 mm diameter stem for durability and strength
• 3 foot coiled lead for durability and long reach
• Stem sealed to protect sensing area

FK13M
• K-type general purpose probe for HK11M handle
• 8 inch sealed stem for immersion into liquids, gels and semi-solids
• Stem sealed to protect sensing area

FK14M
• K-type general purpose probe
• 8 inch sealed stem for immersion into liquids, gels and semi-solids
• 3 foot coiled lead for durability and long reach
• Stem sealed to protect sensing area

GK11M
• Standard K-type thermocouple probe
• 4 foot fiberglass covered lead
• Exposed junction for fast response

GK12M
• Standard K-type thermocouple probe with oven clip
• 4 foot fiberglass covered lead
• Oven clip to shield sensor from direct radiated heat
• Exposed junction for fast response

GK13M
• Standard K-type thermocouple probe
• 4 foot FDA approved insulated lead
• Exposed junction for fast response.

GK14M
• K-type air probe
• Shielded tip to protect sensing area
• 4 inch stem to insert into air ducts
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

GK16M
• K-type air probe for HK11M handle
• Shielded tip with perforations to protect sensing area
• 8 inch stem for easy control and reach into air ducts
• Exposed junction for fast response

GK17M
• Heavy duty K-type air probe
• Shielded tip with perforations to protect sensing area
• 8 inch stem for easy control and reach into air ducts
• 3 foot coiled lead for durability and long reach
• Exposed junction for fast response

HK11M
• Heavy duty handle for K thermocouple probes
• Can be used with the CK15M, FK13M and the GK16M
• 3 foot coiled lead for durability and long reach

GJ11M
• Standard Type J thermocouple probe
• 4 foot fiberglass insulated lead
• Exposed junction for fast response

GJ12M
• Standard Type J thermocouple probe with oven clip
• 4 foot fiberglass insulated leads
• Oven clip to shield sensor from direct radiated heat
• Exposed junction for fast response