Applied Test Systems is the leader in reliable, long lasting, precise lever arm test systems. When combined with our wide range of accessory equipment these machines are capable of performing many types and variations of creep and stress rupture testing.
Lever Arm Test Systems
- Designed for creep and stress rupture testing to ASTM and similar international standards.
- Convenient construction to allow side operation and allows for a variety of furnaces and chambers.
- Counterbalanced lever arm with precision ratio adjustment and rotatable hardened knife-edges and v-blocks. Lever arm construction includes rugged construction that reduces deflection and provides maximum linear knife edge contact.
- Drawhead drive with precision guide assembly and variable speed drive to provide automatic loading and beam leveling.
- Adjustable vibration isolator mounts
- Accessories available for a wide variety of tests.
Available in many models up to 50,000 lb. (222.4 KN) maximum capacity.
|
|
Series 2300 / 2400 / 2500 Creep / Stress Rupture Testing Systems
ATS Creep Testing Systems are precision lever arm testers that incorporate a number of enhanced design features, making them far superior to those of our competitors. Some of those features include:
- Wide-frame construction which allows for a variety of environmental chambers, fixtures, and other accessories, while maintaining compact overall dimensions.
- Convenient side operation.
- Unique Lever Arm Design
- Counterbalanced with precision ratio adjustment.
- On-center loading, providing optimum strength and minimum deflection.
- Rugged vee-block supports for maximum linear knife-edge contact.
- Four-position rotatable Knife edges of high-strength hardened tool steel designed for easy rotation or replacement of worn edges.
- Precision drawhead assembly, providing loading and automatic beam leveling.
- Durable vibration isolator mounts to prevent disturbance to other sensitive equipment upon specimen breakage.
- All models are available with either manual or WINCCS Controls.
Options and Accessory Equipment:
All models of ATS Lever Arm Creep Test Systems are greatly enhanced by our complete line of optional accessories and frame configurations. Available features and components include:
- Custom frame widths, column spacing and frame heights.
- Dual-ratio lever arms.
- Weight elevators with solid state position control available on some models.
- Furnaces, ovens/cooling chambers and controls.
- Controlled-atmosphere retorts.
- Extensometers, including mechanical and non-contacting laser.
- Displacement transducers and controls.
- Alignment couplings.
- Quick-change couplings.
- High temperature Couplings for threaded, buttonhead and flat specimens.
- High Temperature, pull rods, and adapters.
- Compression test fixtures.
- Calibrated Load weights.
- WINCCS equipped models also have the optional features available:
- Automatic Hot Step Loading.
- Automatic “weightless” Loading.
- Stress relaxation testing.
- Constant stress testing.
|
Specifications
Tension / Compression Frames
Model |
2320 |
2330 |
2410 |
2430 |
2510 |
Max. Capacity |
10,000 lbf. (44.4kN) |
12,000 lbf. (53.3kN) |
20,000 lbf. (88.9kN) |
30,000 lbf. (133.4kN) |
50,000 lbf. (222.4kN) |
Column Width* |
18.5 in. |
22.0 in. |
22.0 in. |
22.0 in |
30.00 in. |
Lever Arm Ratios* |
10:1,5:1 |
20:1,16:1, 10:1, 5:1, 3:1 |
20:1, 3:1 |
30:1, 3:1 |
50:1, 5:1 |
Optional Drawhead Drive |
Speed: 0.1-1.2 in. /min. (2.5-30.5mm/min.) |
Load Accuracy |
±0.5% (with certificate of calibration) |
Power Requirements |
115 or 230 VAC, 50/60 HZ |
Compression Only Frame
Model |
2390 |
Capacity |
6,000 lbf. (26.6kN) |
Column Width* |
25.00 in (635mm) |
Lever Arm Ratios* |
10:1, 3:1 |
Load Accuracy |
±1.0% (with certificate of calibration) |
Power Requirements |
115 or 230 VAC, 50/60 HZ |
*Custom frames with varying column widths and lever arm ratios are designed and built to order.
|
|