Shimpo Handheld Tachometers set the standard for quality, reliability, efficient design and ease of use with our lightweight metal construction, handheld contact and contact/non-contact laser tachometers. Recognized worldwide, our tachometers have an unlimited range of industrial and laboratory uses. Contact and non-contact models are available.

Handheld Tachometer Applications

Input/output shaft speed, belt, fan speed, total length and flash rate; from propeller speed to wire or yarn/filament speed, pulp and paper mills to blood centrifuges, Shimpo tachometers are the tachometers most requested by professionals. Some of their most common uses: · Measuring shaft speed
· Measuring conveyor belt speed
· Calibration (comparing speeds to verify that panel mounts are reading   correctly)
· Measure linear speed
· Measure distance (length)
Shimpo DT-209 Handheld Tachometer
Measuring Range: 6 - 99,999 rpm Measuring Range Contact: 0.8 - 25,000 rpm Accuracy: ±1 rpm: 6 - 8,300 rpm / ±2 rpm: 8,301 - 25,000 rpm / ±0.006 % of reading / ±1 digit (or 7 rpm max.): 25,001 - 99,999 rpm
Display 5: digit 0.47””(12 mm) high LCD

Measuring Unit: rpm:
(Non Contact up to 14’ away) Contact: ypm, mPM, fpm, ipm and Length; yd, m, ft, in, linear rate and length: using contact adapter included and 6” or 12” circumference wheels.

Measuring Mode:
USB mode; PC online measuring / standard (STD) mode; Standard measuring / Average (AVE) mode; Average data measuring Memory: STD mode; 24 blocks, 10 points/block (Total; 240 data) AVE mode; 30 blocks (Last, Max, Min, Average data in each block) Date and hour of start/finish are stored in each block. (Can download data with USB communication.) USB communication: USB 1.1 Display Update Time: 1 second (typical) Detection: Laser diode System Control: Single-chip C-MOS microprocessor Over Range Indicator: Flashing numerals Voltage Requirement: 2 AA / 1.5 V Batteries Low Battery Indicator: Flashing ”LO BAT” display Auto Power Shut-Off: Yes (except USB mode) Battery Life: 15 hrs Approx. Operating Environment: Non-corrosive Operating Temperature Range: 32° - 113°F (0 - 45°C) Construction: Die-cast aluminum housing Weight: DT-209X: 0.9 pound (400g) / DT-209X-S12: 1.0 pound (460g) Dimensions: 6.6””L x 2.4””W x 1.8””H (167.5 mm x 60 mm x 46 mm) Warranty: 1 year Standard Accessories: Reflective tape, 2 cone adapters, funnel adapter, 3 1/2” Extension shaft carrying case, NIST certificate, Master Wheel (6” cir.) and 200L adapter, USB cable, case, NIST certificate, Master Wheel (6” cir.) and 200L adapter, USB cable, Application software (CD-R)

Products Menu

Rentals Menu