iBrin-412C Digital Brinell hardness tester is a unified product combining the precise mechanical structure and the load cell control system.
The instrument adopts the motorized test force application without weights, and uses 0.5‰ accuracy compression sensor to feedback and the CPU control system to automatically compensate the test force lost during the test.
The indentation can be directly measured through the digital measuring eyepiece, and it can intuitively show the test force, indentation length, dwell time, test number, date and time on the large screen.
As long as press the eyepiece button after measuring the indentation length, it can automatically get the hardness value and shows on the screen.
Test results can be saved for checking or be printed out by the built-in printer, and with RS232 interface for connecting to the computer.
According to the client’s requirement, it can be equipped with video measuring device and CCD image automatic measuring system.
Suitable for cast iron, steel products, nonferrous metals and soft alloys etc. Also suitable for some nonmetal materials such as rigid plastics and bakelite etc.
- Instrument Main Body
- 2.5mm Ball Indenter
- 5mm Ball Indenter
- 10mm Ball Indenter
- Small Plane Test Table
- Hardness Block 150-250 HBW 10/3000
- 2 Fuse 2A
- Anti-Dust Cover
- 20x Digital Measuring Eyepiece
- Large Plane Test Table
- V-Shaped Plane Test Table
- Hardness Block 150-250 HBW 5/750
- Power Cable
- Instruction Manual